Inflatable Cold Plunge Tub – Revive Inflatable Pod Plunge with Chiller

The published minimum depends on the selected chiller. Nova 0.3 HP reaches 37°F, Core 0.8 HP reaches 35°F, and Apex 1 HP reaches 32°F. Apex also includes an ice making mode at its 32°F set point. Actual water temperature can be affected by ambient conditions, fill volume, ventilation, sun exposure, and whether the cover is in place.

Core 0.8 HP and Apex 1 HP both publish heating up to 107°F. Heating is not documented for Nova 0.3 HP, so choose Core or Apex if hot water operation is required.

Revive does not publish one guaranteed cooling time for this tub across all three chiller options. Starting water temperature, ambient temperature, water volume, chiller selection, ventilation, and use of the cover all change the result. Revive publishes a general cooling estimate of 8 to 10°F per hour for its 0.8 HP tub and chiller combination, but it should not be treated as a guaranteed rate for every Inflatable Pod installation.

Every configuration circulates water through a washable metal mesh prefilter and a replaceable 20 micron cartridge. Core 0.8 HP and Apex 1 HP add built in ozone. Nova 0.3 HP has no built in sanitation system documented. Revive also permits compatible water care products, including its recommended Sirona Spa Care products or chlorine tablets, according to use and environment.

Inspect the filters every 2 to 4 weeks. Rinse the metal mesh screen and check the cartridge. Replace the cartridge when it turns light brown or when water flow remains restricted after cleaning. With daily use, Revive says replacement can be needed about once a month. Actual frequency depends on use, environment, and water care.

Revive describes its chillers as quiet, but it does not publish a tested dB rating for these three configurations. Expect audible fan, pump, and compressor operation. Placement, ventilation, nearby surfaces, and distance from occupied rooms can affect how noticeable the sound feels.

Yes. Revive publishes the system for indoor or outdoor residential use. Outdoor installations must protect the chiller from direct precipitation and preserve airflow. Indoor installations need a flat, water appropriate surface, a plan for condensation and splashes, and a safe drainage route.

It needs a grounded GFCI protected electrical supply but no permanent plumbing. Core 0.8 HP and Apex 1 HP require a dedicated 120 V, 15 A circuit. Nova 0.3 HP requires a source providing at least 10 A, with 12 A recommended by its manual. The tub fills with a hose and drains through the chiller hose using the supplied garden hose adapter.

The tub measures 36 in in diameter by 29 in high. Add the selected chiller footprint, hose routing, comfortable entry space, and at least 24 in of clear fan space. Revive publishes approximately 529 lb for tub and water at 60 gal and 806 lb at 93 gal, with the chiller separate. Confirm that the supporting surface can carry the full operating load before installation.

The product carries a 1 year limited manufacturer warranty from delivery for the original purchaser. It covers qualifying material and workmanship defects affecting normal intended operation. Exclusions include incorrect installation, unsuitable power, freezing, environmental exposure, misuse, poor water maintenance, unauthorized changes, normal wear, filters, consumables, accessories, and third party labor costs. Full terms are in the Revive Plunge Warranty Policy at reviveplunge.com/pages/revive-plunge-warranty-policy.