Couldn't load pickup availability
Built for a routine you can keep
Built to feel permanent
Fiberglass-reinforced acrylic gives the plunge a solid, non-flexing structure and a smooth interior. It feels more like a permanent fixture than a portable tub, while the finished surface is straightforward to wipe down as part of regular care.
One system, two routines
The 1 HP system covers temperatures from 32°F to 107°F, so the same plunge can support cold sessions, ice-making and hot soaking throughout the year. Set the target temperature from the touchscreen or prepare it remotely through the app.
Less work between sessions
The replaceable cartridge, washable mesh pre-filter and built-in ozone work together while the system circulates the water. Regular filter checks and scheduled cleaning are still required, but the main water-care components are already integrated and accessible.
Designed as one complete system
Acrylic construction
Temperature control · Year-round use
Filtration and sanitation
A simple setup plan
Before delivery
The tub measures 72.8 × 32.7 × 26.7 inches. Check every doorway, gate, corridor and turn between the delivery point and its final position before ordering.
Choose the final position
Use a stable, level and water-resistant surface rated for approximately 1,097 lb at the recommended fill and 1,348 lb at maximum capacity. Plan a safe drainage route.
Power and airflow
Provide a dedicated grounded 110–120 V / 15 A GFCI circuit and at least 24 inches of unobstructed airflow. Do not use an extension cord or shared circuit.
Before first use
Keep the chiller upright for 12 hours, inspect the O-rings, connect each inlet to the corresponding outlet and fill the tub 1–2 inches above the water ports before switching on the system.
A SIMPLE CARE SCHEDULE
Cold plunge ownership becomes simpler when the recurring jobs are visible before purchase. These are the core checks that keep the system ready to use.
Check water clarity, flow, hose connections and the operating area.
Clean the metal prefilter and inspect the cartridge filter.
Drain, clean, rinse and refill the tub as directed.
Complete the system deep clean and clean the chiller air filter and condenser.
Clear answers about temperature, installation, water care and warranty.
| Manufacturer | Revive Plunge |
|---|---|
| Product type | Acrylic cold plunge tub with 1 HP chiller |
| Configurations | Residential or Commercial |
| Tub dimensions | 72.8 L × 32.7 W × 26.7 H in |
| Tub base length | 44 in |
| Chiller dimensions | 20 D × 15.5 W × 23.3 H in |
| Construction | Fiberglass-reinforced acrylic tub |
| Insulation | Fully insulated tub and cover |
| Tub weight | 180 lb empty |
| Chiller weight | 100 lb |
| Combined empty weight | Approximately 280 lb |
| Recommended water capacity | 110 gal |
| Approximate filled weight | 1,097 lb at the recommended capacity |
| Maximum water capacity | 140 gal |
| Maximum filled weight | Approximately 1,348 lb |
| Temperature range | 32°F–107°F |
| Temperature system | 1 HP heating and cooling chiller |
| Ice-making mode | Available at 32°F |
| Filtration | Replaceable 20-micron cartridge filter and washable mesh pre-filter |
| Sanitation | Built-in ozone sanitation |
| Controls | Digital touchscreen |
| App control | Tuya Smart app over 2.4 GHz WiFi |
| Lighting | Color-changing LED light |
| Electrical requirement | Dedicated grounded 110–120 V / 15 A GFCI circuit |
| Published power draw | 1,350 W with system running / 121 W with compressor off |
| Plumbing | No permanent plumbing required |
| Connections | Quick-connect inlet and outlet hoses |
| Drainage | Gravity drain through the rear drain nozzle |
| Placement | Indoor or outdoor on a stable, level and water-resistant surface |
| Ventilation | Maintain at least 24 in of unobstructed clearance around the chiller airflow area |
| Specification sheet | View the specification sheet |
Buying equipment to train, recover, and take care of your health at home isn't always simple. At Kinaura Life, we want to help you choose better and buy with peace of mind.
*For shipping outside the contiguous United States (Alaska, Hawaii, and U.S. territories), email us at hello@kinauralife.com.
Plan with confidence
Official documentation and model-specific guidance for this product.
Product video
Product Demonstration
See the product and its key functions in use.
Watch video
Revive Plunge
Acrylic Cold Plunge Tub – Revive Acrylic Plunge with 1 HP ChillerProduct reviews by Revive Plunge.
Need help deciding?
Built for a routine you can keep
The hardest part of building a cold-plunge habit is often everything that happens before getting in: buying ice, waiting for the water to cool and dealing with separate equipment.
The Revive Acrylic Plunge brings those repeated steps into one rigid, finished system. Its fiberglass-reinforced acrylic tub creates a durable, smooth interior, while the insulated construction and cover help preserve the selected temperature.
Its 1 HP chiller cools the water to 32°F, heats it to 107°F and offers ice-making mode. Two-stage filtration, ozone sanitation and app control simplify the work between sessions, so the plunge can remain ready through changing seasons.
A premium acrylic cold plunge built for year-round use. The fiberglass-reinforced acrylic construction creates a rigid, durable and smooth interior that feels more permanent and finished than a flexible tub, while the insulated tub and cover help preserve the selected water temperature.
| Manufacturer | Revive Plunge |
|---|---|
| Product type | Acrylic cold plunge tub with 1 HP chiller |
| Configurations | Residential or Commercial |
| Tub dimensions | 72.8 L × 32.7 W × 26.7 H in |
| Tub base length | 44 in |
| Chiller dimensions | 20 D × 15.5 W × 23.3 H in |
| Construction | Fiberglass-reinforced acrylic tub |
| Insulation | Fully insulated tub and cover |
| Tub weight | 180 lb empty |
| Chiller weight | 100 lb |
| Combined empty weight | Approximately 280 lb |
| Recommended water capacity | 110 gal |
| Approximate filled weight | 1,097 lb at the recommended capacity |
| Maximum water capacity | 140 gal |
| Maximum filled weight | Approximately 1,348 lb |
| Temperature range | 32°F–107°F |
| Temperature system | 1 HP heating and cooling chiller |
| Ice-making mode | Available at 32°F |
| Filtration | Replaceable 20-micron cartridge filter and washable mesh pre-filter |
| Sanitation | Built-in ozone sanitation |
| Controls | Digital touchscreen |
| App control | Tuya Smart app over 2.4 GHz WiFi |
| Lighting | Color-changing LED light |
| Electrical requirement | Dedicated grounded 110–120 V / 15 A GFCI circuit |
| Published power draw | 1,350 W with system running / 121 W with compressor off |
| Plumbing | No permanent plumbing required |
| Connections | Quick-connect inlet and outlet hoses |
| Drainage | Gravity drain through the rear drain nozzle |
| Placement | Indoor or outdoor on a stable, level and water-resistant surface |
| Ventilation | Maintain at least 24 in of unobstructed clearance around the chiller airflow area |
| Specification sheet | View the Acrylic Plunge Data Sheet |
In-stock orders typically leave the manufacturer within 1–2 business days. Free standard freight delivery is available within the contiguous United States and is curbside. White-glove delivery may be available by quote in select locations.
Before ordering, confirm that the 72.8 × 32.7-inch tub can pass through every doorway, gate, corridor and turn along the delivery route. Prepare a stable, level and water-resistant surface capable of supporting approximately 1,348 lb at maximum capacity, plus a safe drainage route.
The chiller requires a dedicated grounded 110–120 V / 15 A GFCI circuit. Do not use an extension cord or shared circuit, and maintain at least 24 inches of unobstructed airflow around the chiller.
Keep the chiller upright for at least 12 hours after delivery or relocation. Before startup, inspect the O-rings, hand-tighten the quick-connect hoses, connect each tub inlet to the corresponding chiller outlet, and fill the tub 1–2 inches above the water ports. No permanent plumbing is required.
The Revive Acrylic Plunge includes a one-year limited manufacturer warranty from the delivery date. Coverage applies to the original purchaser for residential or commercial use and addresses qualifying defects in materials and workmanship.
Covered components include the cooling system and internal plumbing. Revive may repair the affected component or provide a new or reconditioned replacement part after reviewing the claim.
Improper installation, unsuitable electrical service, freezing, blocked ventilation, poor water care, missed maintenance, unauthorized modifications, consumables and third-party labor are excluded. Warranty support may require photos, video and remote troubleshooting. View the manufacturer’s warranty policy.
Designed as one complete system
The Acrylic Plunge brings a rigid insulated tub, dual-temperature control and water care into one coordinated system. Each component has a practical role in keeping the plunge comfortable to use, ready throughout the year and easier to maintain.
Acrylic construction
Temperature control
Filtration and sanitation
Select Residential or Commercial according to the setting and expected frequency of use. If the installation combines personal and professional use, ask a Kinaura Life product advisor before ordering.
Built to feel permanent
Fiberglass-reinforced acrylic gives the plunge a solid, non-flexing structure and a smooth interior. It feels more like a permanent fixture than a portable tub, while the finished surface is straightforward to wipe down as part of regular care.
One system, two routines
The 1 HP system covers temperatures from 32°F to 107°F, so the same plunge can support cold sessions, ice-making and hot soaking throughout the year. Set the target temperature from the touchscreen or prepare it remotely through the app.
Less work between sessions
The replaceable cartridge, washable mesh pre-filter and built-in ozone work together while the system circulates the water. Regular filter checks and scheduled cleaning are still required, but the main water-care components are already integrated and accessible.
A simple setup plan
The Acrylic Plunge does not require permanent plumbing, but its size, filled weight and external chiller should be planned in advance. Four checks make the installation much more straightforward.
Before delivery
The tub measures 72.8 × 32.7 × 26.7 inches. Check every doorway, gate, corridor and turn between the delivery point and its final position before ordering.
Choose the final position
Use a stable, level and water-resistant surface rated for approximately 1,097 lb at the recommended fill and 1,348 lb at maximum capacity. Plan a safe drainage route.
Power and airflow
Provide a dedicated grounded 110–120 V / 15 A GFCI circuit and at least 24 inches of unobstructed airflow. Do not use an extension cord or shared circuit.
Before first use
Keep the chiller upright for 12 hours, inspect the O-rings, connect each inlet to the corresponding outlet and fill the tub 1–2 inches above the water ports before switching on the system.
Clear answers about temperature, acrylic construction, water care, installation and daily use.
The 1 HP system cools and heats the water across a published range of 32°F–107°F. It also offers ice-making mode at 32°F. Performance varies with ambient conditions, water volume, airflow and cover use.
No. The chiller cools the water to the selected temperature and can activate ice-making mode at 32°F, so routine use does not require bags of ice.
Fiberglass-reinforced acrylic creates a rigid, durable and smooth interior that feels more permanent and finished than a flexible tub. The insulated construction and cover also help preserve the selected water temperature.
The system combines a replaceable 20-micron cartridge, a washable mesh pre-filter and built-in ozone sanitation. These components reduce day-to-day work but do not eliminate regular filter checks, cleaning and responsible water care.
Inspect and clean the washable mesh pre-filter every 2–4 weeks and check the 20-micron cartridge at the same time. Replace the cartridge when it becomes light brown or when water flow begins to drop.
No permanent plumbing is required. The system does require a dedicated grounded 110–120 V / 15 A GFCI circuit. Do not use an extension cord or shared circuit.
The tub measures 72.8 × 32.7 × 26.7 inches. Leave at least 24 inches of unobstructed airflow around the chiller and use a stable surface rated for approximately 1,097 lb at the recommended fill or 1,348 lb at maximum capacity.
Yes. Place it on a stable, level and water-resistant surface with suitable drainage and ventilation. Protect outdoor installations from freezing temperatures, excessive heat and prolonged direct sunlight according to the manufacturer’s guidance.
Keep the chiller upright for at least 12 hours after delivery, inspect the O-rings, hand-tighten the quick-connect hoses, connect each tub inlet to the corresponding chiller outlet and fill the tub 1–2 inches above the water ports before switching on the system.
Yes. The system connects to the Tuya Smart app over a 2.4 GHz WiFi network, allowing you to view and adjust the target temperature remotely.
Buying equipment to train, recover, and take care of your health at home isn't always simple. At Kinaura Life, we want to help you choose better and buy with peace of mind.
*For shipping outside the contiguous United States (Alaska, Hawaii, and U.S. territories), email us at hello@kinauralife.com.
