Insulated shell
What is the inflatable tub made from?
- Material
- UV resistant drop stitch PVC
- Insulation
- Fully insulated tub and cover
- Tub size
- 53 in L x 31.5 in W x 24 in H
- Dry tub weight
- 32 lb
Couldn't load pickup availability
Cold on your schedule
Less daily friction
Remote scheduling replaces the repeated ice run and the last minute wait. Set the system around the part of the day you can actually protect, then approach the plunge as a routine instead of another setup task.
A setup that moves
The inflatable tub can be deflated and packed into its backpack when the space needs to serve another purpose. That flexibility makes a serious plunge routine possible without treating the product like a permanent built in fixture.
Designed as one complete system
Insulated shell
Three chiller paths
Water care system
A simple setup plan
Access first
The empty tub is 53 in long, 31.5 in wide and 24 in high. Measure doors, stairs and turns for the selected chiller too. Carry the tub and chiller separately, then connect them only after both are in the final position.
Support the fill
Use a flat, level surface. Revive publishes 950 lb at the recommended fill and 1,075 lb at maximum fill. Indoors, add a water resistant floor covering to manage condensation and splashes.
Power and airflow
Nova requires a 110V GFCI source with at least 10A and 12A recommended. Core and Apex require a dedicated 120V, 15A circuit. Keep 24 in clear at the fan area and protect the unit from direct precipitation.
First start
Inflate the tub to 10 PSI and the cover to 7 PSI. Check O rings, filters, hose direction and valves, then fill at least 6 in above the lower outlet. The initial A08 flow message can remain for 2 to 3 minutes while air purges. Add the manufacturer recommended oxidizer and circulate for 10 to 15 minutes before use.
A SIMPLE CARE SCHEDULE
Cold plunge ownership becomes simpler when the recurring jobs are visible before purchase. These are the core checks that keep the system ready to use.
Before every session
Confirm that the water is clear, the level remains above the outlet and circulation is unobstructed. Look at hoses, valves and the area beneath the chiller for fresh moisture before starting the session.
Every 2 to 4 weeks
Rinse the metal mesh prefilter and inspect the 20 micron cartridge. Replace the cartridge when it turns light brown or flow drops. With daily use, Revive advises roughly monthly cartridge replacement.
Every 2 to 3 months
Drain and refill according to water condition and use. Wipe the tub with a soft nonabrasive cloth and mild solution, then inspect valves, O rings, hose seals and cover straps before refilling.
Every 6 months
Follow the deep cleaning procedure for the selected chiller, then remove dust from the air filter and condenser area. Inspect power cable, hoses and fittings, and replace worn parts before the next heavy use period.
Clear answers about temperature, installation, water care and warranty.
| Manufacturer | Revive Plunge |
|---|---|
| Product type | Inflatable cold plunge tub with external chiller |
| Configurations | Nova 0.3 HP, Core 0.8 HP or Apex 1 HP chiller |
| Tub dimensions | 53 in L x 31.5 in W x 24 in H |
| Construction | Fully insulated, UV resistant drop stitch PVC tub with insulated cover |
| Chiller dimensions | Nova 20 in W x 12 in D x 16 in H; Core 16 in W x 18 in D x 18 in H; Apex 15.5 in W x 20 in D x 23.3 in H |
| Cooling and heating | Nova cooling only; Core cooling and heating; Apex cooling, heating and ice mode |
| Published temperature range | Nova to 37°F; Core 35°F to 107°F; Apex 32°F to 107°F |
| Filtration | 20 micron cartridge filter plus washable metal mesh prefilter on all chiller configurations |
| Sanitation | Built in ozone with Core and Apex; ozone is not documented for Nova |
| Controls | Chiller touchscreen plus remote mobile app control |
| Recommended water capacity | 110 gal |
| Maximum water capacity | 125 gal |
| Tub dry weight | 32 lb |
| Chiller dry weight | Nova 56 lb; Core 90 lb; Apex 100 lb |
| Published tub plus water weight at recommended capacity | 950 lb |
| Published tub plus water weight at maximum capacity | 1,075 lb |
| Electrical requirement | Nova 110V GFCI source with at least 10A and 12A recommended; Core and Apex dedicated 120V, 15A circuit |
| Plumbing and drainage | No permanent plumbing required; quick connect hoses and integrated drain |
| Ventilation | Maintain 24 in clearance at the chiller fan area |
Buying equipment to train, recover, and take care of your health at home isn't always simple. At Kinaura Life, we want to help you choose better and buy with peace of mind.
*For shipping outside the contiguous United States (Alaska, Hawaii, and U.S. territories), email us at hello@kinauralife.com.
Product reviews by Revive Plunge.
Inflatable cold plunge with external chiller
The Revive Inflatable Plunge is a fully insulated drop stitch PVC tub paired with an external chiller. It sets up without permanent plumbing, moves when you move, and holds 110 gallons at the recommended fill.
The tub measures 53 by 31.5 inches and stands 24 inches tall. It weighs 32 pounds dry, so one person can carry it, and the insulated, UV resistant cover clips on with straps to keep the water cold between sessions.
You choose the chiller. Nova 0.3 HP cools to 37°F on a standard outlet. Core 0.8 HP cools to 35°F and heats to 107°F. Apex 1 HP cools to 32°F, heats to 107°F and adds ice mode. Core and Apex include built in ozone sanitation.
Every configuration filters through a 20 micron cartridge and a washable metal mesh prefilter. The chiller has a touchscreen, and the Revive app controls temperature and schedules from your phone.
Filled to 110 gallons, the tub weighs about 950 pounds. Place it on a flat, level surface that carries that load, leave 24 inches of clearance at the chiller fan, and plan a drainage route before you fill it.
Free shipping in the contiguous United States. Standard delivery is curbside. The tub, cover and chiller ship boxed; no crate and no freight appointment for the tub itself.