2 Person Traditional Sauna by Revive with Harvia 3.5 kW Heater

The sauna can reach a maximum temperature of 194°F. Users can select a lower temperature through the touchscreen control panel or SmartLife app.

Yes. The sauna is designed for indoor or outdoor use and includes a roofing kit for outdoor installation. The site must provide adequate structural support, a compliant electrical connection and unobstructed ventilation.

It requires a dedicated 240V, 20A circuit and a NEMA 6-20P connection. Extension cords, adapters and power strips must not be used.

The preassembled panels are designed to simplify installation. Assembly takes approximately 2 to 3 hours with two people. A licensed electrician may be required for the electrical supply, depending on local regulations.

A traditional sauna uses an electric heater and heated stones to warm the room. Small amounts of water can be poured over the stones to create steam. An infrared sauna uses infrared emitters to warm the body and surrounding surfaces without sauna stones.

Yes. A bucket and ladle are included for applying small amounts of water to the stones. Excessive water should not be used because it may damage components or create an electrical hazard.

Wipe interior surfaces after each session and air out the cabin for 15 to 30 minutes. Use a mild, nonabrasive cleaner for weekly care and avoid excessive water or harsh chemicals.

Inspect the stones regularly and make sure they remain correctly arranged. Replace stones that become cracked or degraded. Rinse all stones before their first use.

Electrical components are covered for one year and structural components for two years against manufacturing defects. The warranty applies only to the original purchaser and excludes normal wear, cosmetic wood aging, improper installation and inadequate maintenance.

A traditional sauna heats the air with a stove and sauna stones. The cabin runs at 160 to 195°F and you can pour water on the stones for a burst of steam.

An infrared sauna warms your body directly at 118 to 140°F, with no steam. Choose traditional if you want real heat, humidity and the classic sauna ritual.

Most people run a traditional sauna between 160 and 185°F. Allow 30 to 45 minutes to preheat, a little longer in a cold room.

Sessions last 10 to 20 minutes, with a cool down in between. Two or three rounds is a full sauna.

This model runs on 240V, 20A. That is a dedicated circuit installed by a licensed electrician, the same kind an electric range or a dryer uses. Book the electrician before your delivery date, not after.

Need an electrician? Mr. Electric and Mister Sparky cover most of the US.

Need help? Call us at (302) 208-4650 or email hello@kinauralife.com.

Check the Specs tab: some models are indoor only, others include a roofing kit for outdoor use.

Indoors, you need a dry, ventilated room with a solid, level floor and a ceiling that clears the sauna height (39.76" D × 46.77" W × 81.66" H) with a few inches to spare. Outdoors, set it on a level, solid base away from sprinklers and standing water.

Footprint: 39.76" D × 46.77" W × 81.66" H. Leave 2 to 4 inches behind and on each side for air flow, room in front for the door to swing open, and the clearance above the heater that the manual sets out.

Measure the route in as well: doorways, stairs and turns. The panels are large, so check the tightest corner first.

It ships by LTL freight, curbside, on a pallet. The carrier calls you to schedule a delivery window and leaves the boxes at the curb or end of your driveway, not inside.

The panels are heavy, so plan on two or three people to carry them in. Inspect every box for visible damage before you sign for it.

Need help moving the boxes in or putting it together? We Can Assemble offers professional assembly. Or call us at (302) 208-4650 and we will point you to the right option.

The cabin is built from panels. Two people with basic tools can put it together in about half a day. Models with preassembled walls take 2 to 3 hours. The heater is connected by your electrician.

Prefer not to DIY? Professional assembly is available through We Can Assemble.

Yes. The heater is designed for it. Use one ladle of clean water at a time and let the stones heat for a full 30 to 45 minutes before the first pour.

Keep the cabin dry between sessions: leave the door open afterwards until the wood is dry.

Wipe the benches with a soft cloth after each session and leave the door open until the cabin is dry. Avoid bleach, ammonia and solvent cleaners on the wood.

Rinse and reposition the sauna stones once or twice a year, and replace any that have cracked.

Manufacturer warranty on this model: 1 year Electrical Warranty. The full terms are in the Warranty tab above. Keep your proof of purchase for any claim.

As an authorized dealer, we handle the claim with Revive Plunge for you.